Maintenance Methods And Requirements For Diamond Saw Blades

Diamond saw blades also need maintenance, and their lifespan is not entirely determined by their quality. It also requires users to treat them carefully, so as to prolong their lifespan and help you save more costs.

Maintenance method of diamond saw blade:

1. The inner diameter correction and positioning hole processing of the diamond saw blade must be carried out by the manufacturer. If the processing is not good, it will affect the performance of the product, and there may be risks. In principle, the reaming should not exceed the original diameter of 20mm to avoid affecting the balance of stress.

2. When the diamond saw blade is no longer sharp and the cutting surface is rough, it is necessary to regrind in time. Grinding can not change the original point of view, and damage the dynamic balance.

3. If the diamond saw blade is used improperly, it should be placed flat or suspended by using the inner hole. No other items or footsteps can be stacked on the flat diamond saw blade, and attention should be paid to preventing moisture and rust.

Application requirements of diamond saw blades:

1. When it is found that the sound and vibration are abnormal, the cut surface is rough, or an odor occurs, it is necessary to stop the operation immediately, check in time, and troubleshoot to prevent accidents.

2. When working, the workpiece should be fixed, and the profile positioning should conform to the direction of the knife to avoid abnormal cutting. Do not apply side pressure or curve cutting. The workpiece flew out and an accident occurred.

3. When dry cutting, please do not cut continuously for a long time to avoid affecting the service life and cutting effect of the saw blade; for wet cutting, water should be added to cut to prevent leakage.

4. If cutting aluminum alloy or other metals, special cooling lubricant should be used to prevent the saw blade from overheating, causing tooth paste, and other damage, which will affect the cutting quality.

5. When starting cutting and stopping cutting, do not feed too fast to prevent broken teeth and damage.

6. The equipment chip removal groove and slag suction equipment ensure dredging to prevent the slag from accumulating and affecting production and safety.