Heat Treatment Process Of Diamond Saw Blade Base

The heat treatment process of the diamond saw blade substrate, the diamond saw blade is mainly used to cut hard and brittle stone, it is one of the main tools for the production of natural stone plates, using traditional abrasives and equipment will have a series of problems, such as quality, firmness , spalling and excess cost of production, etc. Diamond Grinding Wheel The hardness of the diamond abrasive determines the main characteristics of the diamond grinding wheel, which can efficiently grind hard alloys, glass, ceramics and other difficult-to-machine materials, and the grinding tools have the longest service life.

They cannot win the competition and profit. These companies are looking for new equipment, often designed for superabrasive tools, in order to gain high profitability. Refined casting and forging can eliminate many pre-processing steps for part production.

The use of new materials requires a diamond roller or a dresser with a diamond pen for dressing, shovel grinding. The calculation of the truncation design of the grinding wheel is quite complicated, so some approximate calculations are often used in production for some parts such as camshafts, crankshafts, wheels, Brake parts and supports can now be pressed or forged, and then finished with high-speed grinding or high-speed machining operations, which can significantly reduce the time from raw material to finished parts. The heat treatment technology is unreasonable or not too good, which is the cause The main reasons for the low production level and product quality of diamond saw blade substrates of many manufacturers in my country.

Diamond Grinding Wheel The hardness of the diamond abrasive determines the main characteristics of the diamond grinding wheel, which can efficiently grind hard alloys, glass, ceramics and other difficult-to-machine materials, and the grinding tools have the longest service life. The diamond grinding wheel uses diamond abrasive as raw material, and uses metal powder, resin powder, ceramics and electroplated metal as binders respectively. The circular bonded abrasive tool with a through hole in the center is called diamond grinding wheel (alloy grinding wheel). The copper (chemical formula Cu) foil or aluminum foil on the cylinder is grooved with the tip made of single crystal diamond, and finally it is made into an almost ideal cutting material for the application of ultra-finishing.